Call Us/Whatsapp Us: +65 8385 9933 | Email: aman@amanengineering.com.sg for inquiry and free quotation

SS Code Design Services: A Guide to Structural Design and Compliance in Singapore

SS Code Design Services: A Guide to Structural Design and Compliance in Singapore

Key Takeaways Structural design in Singapore combines engineering judgment with applicable Singapore Standards, Eurocodes, and regulatory requirements. Clear scope, coordinated information, and careful review help teams move from early decisions to construction documents. Confirm which codes, regulations, and project-specific requirements apply. Gather reliable site, geotechnical, architectural, and services information early. Coordinate structural choices with construction […]

How Often Is PFI for an Office Tower Required in Singapore? (Commercial Building Guide)

Introduction For an eligible office tower in Singapore, Periodic Façade Inspection (PFI) is required every 7 years once the building is more than 20 years old and taller than 13 metres. This statutory obligation is set under the Building Control Act and enforced by the Building and Construction Authority (BCA). Buildings over 20 years old […]

Who Can Carry Out PSI for an Office Building in Singapore? (Owners’ Guide by AMAN Engineering)

Introduction Only a Professional Engineer (Civil or Structural discipline) registered with Singapore’s Professional Engineers Board (PEB) and holding a valid current practising certificate can legally carry out periodic structural inspection for an office building in Singapore. No other professional, regardless of experience, is authorised to certify a PSI report that BCA will accept. This guide […]

Video Guide SCDF Building Plans: BP, FP and FSC Submission for Commercial Projects

Introduction This article supports AMAN Engineering Consultancy’s site-embedded video titled “SCDF Building Plans BP, Fire Protection FP Plans and Fire Safety Certificate (FSC) submission.” The video and this companion text walk through the full lifecycle of fire safety plan submission for commercial buildings in Singapore: from preparing building plan drawings and fire protection plan layouts, […]

How Much Does Change of Use Approval for an Office-to-F&B Conversion Cost in Singapore?

Introduction Converting a private commercial office into a café, restaurant, or bakery in Singapore requires change of use approval from the Urban Redevelopment Authority (URA), fire safety clearance from SCDF, and a Food Shop Licence from SFA before you can serve a single customer. Depending on the unit’s approved use and planning conditions, some cases […]

How Much Does an SCDF Fire Safety Certificate for a Shopping Mall Cost in Singapore?

Introduction The cost of obtaining an SCDF fire safety certificate for a shopping mall in Singapore ranges from approximately S$700,000 to over S$12 million, depending on the mall’s size, complexity, and whether it is a new build or retrofit. Most building owners are surprised to learn that the Singapore Civil Defence Force statutory fees themselves […]

BCA Periodic Structural Inspection (PSI) for Multi‑Storey Car Parks: What the Professional Engineer Checks On Site

Introduction A BCA Periodic Structural Inspection (PSI) is a mandatory on‑site examination of a multi‑storey car park’s structural condition, carried out by a registered professional engineer (PE) in Singapore. The Building and Construction Authority requires this inspection under the Building Control Act to catch deterioration, corrosion, overloading, and unauthorised modifications before they compromise safety. The […]

BCA Periodic Façade Inspection (PFI) for Residential Towers with Balconies: What the Professional Engineer Checks On Site

Introduction During a BCA periodic facade inspection, the Professional Engineer (PE) acting as the Competent Person (CP) systematically examines every exterior elevation of a residential tower and physically inspects at least 10% of each elevation at close range. For towers with balconies, this means hands-on checking of balcony slabs, soffits, railings, tiles, cladding, sealants, windows, […]