Call Us/Whatsapp Us: +65 8385 9933 | Email: aman@amanengineering.com.sg for inquiry and free quotation

Independent Design Review in Singapore: Statutory and Voluntary

Checker reviewing structural design drawings

In Singapore, an independent design review is either a statutory accredited check, where a registered accredited checker independently evaluates and recalculates the structural design, or a voluntary peer review commissioned for assurance beyond the legal minimum. The statutory check is mandatory only where the Building Control framework triggers it. The voluntary review is a project decision, justified by complexity, interfaces and the consequence of failure. Developers and building owners who plan both together, with one coordinated submission programme, reach approval with fewer reworked drawings.

Com
Coordinate Reviews With Approval Submissions
Aman Engineering Consultancy supports statutory submissions and PE endorsements, helping review findings feed into the approval route.

Visit

TL;DR

  • The statutory form is an accredited checker’s independent structural evaluation, analysis and original calculations, closed by a prescribed certificate and evaluation report.
  • The checker and the relevant organisation’s personnel must declare no professional or financial interest in the works, so the reviewer cannot be the designer.
  • A voluntary peer review suits complex, novel or high-consequence projects, and it does not carry the statutory status of an accredited check.
  • For complex buildings, BCA advises early pre-consultation before plan submission, so the review should be scoped during concept design.
  • Aman Engineering Consultancy coordinates statutory submissions and PE endorsements so the review findings feed directly into the approval route.

Table of Contents

What an independent design review means in Singapore

The phrase covers two different things, and the difference determines who may do the work, what it produces and what legal weight it carries.

The statutory meaning. Under the Building Control (Accredited Checkers and Accredited Checking Organisations) Regulations, the formal review is performed by an accredited checker, who carries out an independent evaluation, analysis and review of the structural design, conducts original calculations to verify the adequacy of key elements, and submits prescribed certificates and an evaluation report. The High Court has confirmed that an accredited checker must evaluate, analyse and review the structural design and perform original calculations, and that the checker’s duty is personal and non-delegable. A checker cannot simply sign off the designer’s output, and cannot hand the substance of the work to a junior.

The voluntary meaning. A broader building or infrastructure peer review may be contractual or voluntary. It can test design intent, code alignment, discipline coordination, constructability and operability. It is a valuable risk-control tool, but it does not automatically carry the statutory status of an accredited check, and it does not replace one where the regulations require one.

Owners should state in the brief which of the two is being commissioned. A review described only as “independent” invites disputes about scope, deliverables and reliance.

Aspect Statutory accredited check Voluntary design peer review
Basis Building Control Act and regulations Contract or owner’s decision
Reviewer Registered accredited checker (or specialist accredited checker for prescribed underground works) Any suitably competent independent engineer or team
Output Prescribed certificate and evaluation report Findings report, designer responses, documented closure
Scope Prescribed structural and geotechnical matters Defined by the owner: concept, coordination, buildability, operability
Status Part of the approval route Assurance beyond the statutory minimum

A statutory accredited check is required where the Building Control Act and its regulations trigger an accredited checker or a specialist accredited checker. This includes prescribed categories of structural works and underground works. The regulations do not establish a universal requirement for every project, so the first task is to confirm, with the appointed Qualified Person (QP), whether the proposed works fall within a prescribed category.

A voluntary review is recommended in the following situations:

  • Complex, novel or high-consequence structures, such as long-span, transfer-heavy or tall configurations.
  • Multi-disciplinary projects with major interfaces between structure, façade, mechanical and electrical systems.
  • Unusual temporary works, deep excavations near sensitive neighbours, and unconventional construction sequences.
  • Lender, insurer or investor requirements for independent assurance.
  • Any project where the owner wants confidence beyond the statutory minimum before committing to construction cost.

Our overview of the accredited checker system sets out how structural peer review fits the statutory framework.

What the review covers

The statutory structural check is defined by the matters the checker must examine. The High Court’s analysis of the checker’s duty lists them: the adopted code of practice, design loadings including wind where applicable, software assumptions and limitations, engineering models, material standards and specifications, the structural concept and key elements, stability and robustness, and integrity-critical features. Those features include foundations, piles, retaining structures, columns, long-span members, transfer beams, connections and detailing.

For underground works, the regulations require specialist accredited checkers to review specified geotechnical matters. These include:

  1. Site investigations and geotechnical parameters.
  2. Construction methods and sequence.
  3. Excavation stability, deformation and groundwater.
  4. Reinforcement.
  5. Instrumentation and monitoring.

A voluntary review commonly adds checks that the statutory scope does not require: clash and coordination between disciplines, buildability of the proposed details, maintainability, and whether the design intent survives the shop-drawing stage. On Land Transport Authority contracts, for example, LTA states that project contracts require QP(D) review of shop drawings, bar-bending schedules and other non-statutory submissions, including checks against BCA-approved drawings and design intent. Review obligations therefore continue after plan approval on public infrastructure work.

Owners with retaining structures or basements should also read our note on the statutory duties for retaining structures.

Who may perform the review and what independence means

The statutory reviewer must be a person registered as an accredited checker, or the relevant specialist accredited checker for prescribed geotechnical underground works. The Building Control Act defines an accredited checker as a person registered under section 16, acting personally or for an accredited checking organisation.

Independence is a legal condition, not a courtesy. Under the regulations, the checker and the relevant organisation personnel must declare that they have no professional or financial interest in the works. The organisation must also meet registration conditions, including a stated ISO 9001 scope and minimum professional-liability insurance of S$2 million.

The practical consequences for an owner are direct:

  • The design engineer and the accredited checker for the same works must be separate parties.
  • The checker’s fee and appointment should be structured so that no financial interest in the outcome or in the works arises.
  • A voluntary reviewer should be held to the same standard of independence in the contract, even where the law does not require it, because a review by a party with a stake in the design adds little assurance.

How the review process runs

For a statutory check, the checker receives the plans and supporting design information, performs the prescribed independent analyses and original calculations, identifies any non-compliance, and submits the prescribed certificate and evaluation report without delay after completing the duty. Known or reasonably discoverable contraventions must be notified to the Commissioner of Building Control.

A voluntary review follows a similar discipline. A sound workflow has these stages:

  1. Scope definition. Fix the disciplines, the design stage, the reference codes and the deliverables in writing.
  2. Document review. Examine drawings, calculations, models, specifications and the design basis report.
  3. Cross-checking. Test the structure against architectural, façade and M&E requirements, and verify key calculations independently.
  4. Constructability assessment. Examine sequences, temporary works and tolerances against the proposed construction method.
  5. Severity-ranked findings. Classify each finding so that critical items are resolved before submission.
  6. Findings report and designer responses. Each item receives a written response and, where needed, a revised drawing or calculation.
  7. Documented closure. Every finding is closed or consciously accepted, with a record of who accepted it.

The usual failure points are an undefined scope, late delivery of design information, and findings that are answered verbally and never closed on paper. Where the owner engages us for statutory submissions, we coordinate the responses to review comments with the PE team so that revised drawings, calculations and endorsements stay consistent across the submission set.

How the review relates to BCA submissions

Before building works commence, building plans must be submitted to BCA for approval through a QP. The appointed structural QP is responsible for obtaining approval for structural plans and securing a building permit before construction begins. The independent review sits inside this route: where an accredited check applies, its certificate and report form part of what the QP submits.

Submission channels have also changed. As of 1 October 2025, building-plan submissions for all new projects with a GFA of at least 30,000 sqm must be made through CORENET X, while other building-plan submissions continue through CORENET 2.0. Teams should confirm which channel applies at the start, because it affects the format and sequencing of design deliverables.

BCA submission channels and review documents

For the wider submission sequence, see our guide to BCA plan approval and the complete guide to BCA submissions.

What the project team should prepare

A review is only as good as the information it receives. Incomplete packages produce provisional comments that must be reissued later. A prepared team provides:

  • Design basis report: the adopted codes, design life, loadings including wind where applicable, and the performance criteria.
  • Structural calculations: the full set, with software name and version, modelling assumptions, boundary conditions and limitations.
  • Analysis models: files that the checker can run independently, so that original calculations can be performed rather than only inspected.
  • Drawings and specifications: structural layouts, key-element details, connection details, material standards and specifications.
  • Geotechnical data: site investigation results, interpreted parameters, groundwater conditions and, for underground works, the construction sequence and monitoring plan.
  • Interface information: façade loads, M&E penetrations, heavy equipment loads and temporary works proposals.
  • Stability and robustness provisions: the approach to disproportionate collapse and load paths through transfer elements.

Our structural engineering checklist expands this list to the level of individual submission items.

When to commission the review

Commission the review before the design is frozen, not after the drawings are submitted. For complex buildings, BCA’s 2025 circular advises QPs to plan ahead and arrange early pre-consultation with BCA before plan submission, noting that failing to do so may slow approval. The QP should bring the structural concept, performance issues such as deflection, vibration and acceleration, disproportionate-collapse measures, buildability proposals and tentative construction methods.

A review commissioned at concept stage can still change the structural system at modest cost. The same finding at the permit stage forces redesign, resubmission and, if construction has begun, abortive work.

Safety review follows the same logic. Singapore’s Workplace Safety and Health Council guidance states that Design for Safety review meetings should begin as early as possible during design and pre-construction, with developers, designers and contractors identifying foreseeable risks across construction, operation, maintenance and demolition. Aligning the design review calendar with the Design for Safety sessions avoids two separate rounds of drawing revisions.

Duration and cost depend on the number of disciplines in scope, the quality of the information package, the number of review iterations, and whether the design changes mid-review. Fees are project-specific and are agreed against a defined scope.

When to commission the review

Coordinating review with approvals

The most common cause of delay is not the review itself but the disconnect between review findings and the approval submission. Revised calculations that do not match revised drawings, or a PE endorsement issued against a superseded set, send submissions back. A single party coordinating statutory submissions across the disciplines removes that disconnect. Our guide to streamlining the structural design approval process and the note on structural certification for developers describe the sequence in more detail.

Statutory submissions and review support from Aman Engineering Consultancy

Aman Engineering Consultancy provides authority approvals, PE endorsements, feasibility studies, value engineering and project management for developers, construction firms and building owners in Singapore. Our approach is built on single-point statutory coordination, a multidisciplinary PE team and BIM-based coordination, with a 99% authority clearance rate as our own stated measure. Owners who need review findings translated into a clean submission set can begin with our authority approvals service or contact us through the Aman Engineering Consultancy site.

Com

For early-stage decisions, our feasibility studies and value engineering services test the structural and cost assumptions before the design is committed to review.

Our perspective

A design review pays for itself at the point where it is cheapest to act on: the concept and design development stages. We see the review as one input to a single approval programme, not a separate event.

The statutory accredited check and the voluntary peer review answer different questions. The first confirms that the structural design meets the legal standard under independent scrutiny. The second tests whether the whole design, across disciplines, can be built, operated and approved without surprises. Owners with complex projects benefit from both, scoped in writing and sequenced against the BCA submission.

Our work is the part that follows the findings: coordinating statutory submissions, PE endorsements and BIM-based coordination so that every revision reaches the authorities consistently. Our multidisciplinary PE team and single-point coordination are designed to keep structure, façade, M&E and fire safety submissions aligned.

Aman

FAQ

Is an independent design review mandatory for every building project in Singapore?

No. A statutory accredited check is required only where the Building Control Act and its regulations prescribe it, such as for specified structural and underground works. The regulations do not impose a universal requirement. Confirm the position with your QP at the start of design.

Can the design engineer carry out the independent review?

No. The accredited checker and the relevant organisation personnel must declare that they have no professional or financial interest in the works. The reviewer must therefore be a separate party from the designer.

What does the reviewer deliver at the end?

For a statutory check, the accredited checker submits the prescribed certificate and an evaluation report, and notifies the Commissioner of Building Control of any known or reasonably discoverable contraventions. A voluntary review typically ends with a severity-ranked findings report, designer responses and documented closure of each item.

How early should the review start?

At concept or early design development. BCA’s 2025 circular advises early pre-consultation for complex buildings, and Design for Safety review meetings should also begin as early as possible. Starting early lets findings change the design before drawings are submitted.

Does a voluntary peer review replace the accredited check?

No. A voluntary review does not carry the statutory status of an accredited check. Where the regulations require an accredited checker, that check must still be performed by a registered accredited checker.

Sources